Change Tv Name - Grundig FINE ARTS 55 FLX 9490 SL Manual

neTWoRK­seTUP
12 Select the line »Gateway« with »
Enter Gateway address with »1...0«.
13 Select the line »Select Access Point« with
» « or » « and press »oK« to confirm.
Λ V
– » Select Access Point« menu is displayed
by scanning available wireless networks.
14 Select the network that you want to connect
with » «, » «, »
V Λ
with »oK«.
– W ireless connection password screen is
displayed.
note:
For device to discover the wireless modem
7
on the network, the network name should
support ASCII characters.
15 Select the required character with »
< >
» «, » « or »
Λ
character with »oK«.
– U sing »shift«
between uppercase letters / numbers and
lowercase letters / special characters.
– S elect » « to delete the character
entered and press »oK« to confirm.
16 Confirm the password with »
– » Connecting ... Please wait« message
will be displayed, and if the connection
is established »Connection To Gateway:
Success« messages will be displayed.
17 Press » « (green) to check the performed

settings and also if the local network and
internet connection has been established.
– » Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success«
messages will be displayed.
18 Press »eXIT« to end the setting.
42­ ENGLISH
­ - ------------------------------------------------------------------------------------------
«.
V
< >
« or » « and confirm
V
« and move to the next
»oK«, you can switch
,
« (green).

Change­TV­name
To make it possible to identify your TV in the net-
work, the name "Inter@ctive TV" is assigned at
the factory. You can change the name.
1 Open the menu with »MenU«.
2 Activate the menu item »Settings« with
»oK«.
3 Select the menu item »TV Settings« with
» « or »
V
4 Select the line »About« with »
and press »oK« to confirm.
5 Select the line »TV Name« with »
» « and press »oK« to confirm
Λ
6 Delete the current name. To do this, select
the »Clear« button with »
«,
>
» « and confirm with »oK«.
7 Select the required character with »
» «, »
Λ
character with »oK«.
– U sing »shift«
between uppercase letters / numbers and
lowercase letters / special characters.
– S elect »
entered and press »oK« to confirm.
8 Confirm the new name by pressing »
(green).
9 Press »eXIT« to end the setting.
« and press »oK« to confirm.
Λ
«, »
V
< >
« or » « and move to the next
»oK«, you can switch
,
« to delete the character
« or » «
V Λ
« or
V
<
«, » « or
Λ
«,
V
«
