Ventilation; Fixing To The Built-In Cabinet - Smeg Universale Aesthetic SI4742D Manual

the top of the appliance installed below.
On top of empty kitchen unit or drawers
If there are other pieces of furniture (lateral
walls,
drawers, etc.), dishwashers or fridges under the
hob, a double-layer wooden base must be
installed at least 20 mm from the bottom of the
hob to avoid any accidental contact. It must
only be possible to remove the double-layer
base using suitable equipment.
opens on bottom:
36 - INSTALLATION
opens on rear:
Failure to install the double-layer
wooden base exposes the user to
possible accidental contact with sharp
or hot parts.
If installed on top of an oven, the latter
must be equipped with a cooling fan.

Ventilation

The illustrations below show two examples of
installation suitable for proper ventilation and
one example of incorrect installation to be
avoided.

Fixing to the built-in cabinet

The clips should not be installed at the
front of the appliance.
To ensure the hob is fixed and centred as
accurately as possible, the clips provided must
be positioned as described below:
1. Fit the clips by gently pressing them
horizontally into the appropriate space.
91477A921/A