Stamina 55-5557B Owner's Manual page 12

OPERATIONAL INSTRUCTIONS
HEADREST ADJUSTMENT
The HEADREST(35) on the CARRIAGE(26) can be positioned flat
or at an incline by simply pivoting the support bracket underneath
the HEADREST(35).
PULLEY ADJUSTMENT
There are three adjustment holes on each side of the PULLEY
POST(39) for attaching the PULLEY SETS(41) in different
widths. Remove the ADJUSTMENT KNOBS(43) and ARC
WASHERS (M8)(76) from the PULLEY POST(39). Attach the
PULLEY SETS(41) to the position you want and secure with the
ADJUSTMENT KNOBS(43) and ARC WASHERS(M8)(76).
NOTE: Always use the same adjustment holes for both sides.
FOOTBAR ADJUSTMENT
The FOOTBAR(17) can be positioned at three angles. Lift the
FOOTBAR(17) until the pins come out of the slots on the FRONT
BRACE(1). Move the FOOTBAR(17) to the desired position and
lock the FOOTBAR(17) in position by pushing it down so that the
pins are in the slots on the FRONT BRACE(1).
NOTE:
1. Always make sure the pins are locked into the slots properly.
2. Use forward position of the FOOTBAR(17) when standing on
the AeroPilates® Pro XP557 with one foot on the FRONT
WOODEN PLATFORM(3).
SLOT
12
Support
Bracket
PIN
FORWARD
POSITION