ASSEMBLY INSTRUCTIONS
STEP 9
Insert the PULLEY POST(39) into the REAR WOODEN PLATFORM(14) and secure with SOCKET
BOLT(M10x1.5x35mm)(61). Insert the PULLEY SETS(41) through the PULLEY SPACERS(42) and the
PULLEY POST(39) and secure with ADJUSTMENT KNOBS(43) and ARC WASHERS(M8)(76).
STEP 10
Screw the two FOAM PADS(37) into the CARRIAGE(26).
STEP 11
The FOOTBAR(17) and the CARDIO REBOUNDER(49) cannot be used at the same time. For cardio
workouts, install the CARDIO REBOUNDER(49) and for Pilates workouts, install the FOOTBAR(17).
1.
To install the FOOTBAR(17), insert the FOOTBAR(17) into the LEFT and RIGHT FOOTBAR SUPPORTS
(15, 16). Lock the FOOTBAR(17) in position with the PULL PINS(95) on both sides.
2.
To remove the FOOTBAR(17), remove the PULL PINS(95) on both sides. Grasp the FOOTBAR(17)
on both sides, pull up, and remove. Store the PULL PINS(95) by inserting them back into the holes on
the LEFT and RIGHT FOOTBAR SUPPORTS(15, 16).
3.
Refer to the inset drawing. To install the CARDIO REBOUNDER(49), insert the CARDIO REBOUNDER
(49) posts into the holes in the FRONT WOODEN PLATFORM(3).
10