10. Attach the EMC core supplied as shown below.
Cable
entrance
Cable
clamping plate
EMC core
E04SS251512
(Above cable
clamping
plate)
PTU-9335
11.Attach the shield covers. Make sure the cable is not caught by the cover.
12.Attach the radome cover. Align the triangle mark on radome cover with that on radome base.
13.Fasten the radome bolts.
J801
J802
J805
J804
J803
J1
How to attach EMC core
How to attach the radome cover
MD9208
J806
Motor
*1: For Antenna unit RSB-0071-057,
J613
*2: For Antenna unit RSB-0071-057A,
J611
IF-9214*
1
or
2
03P9522*
Radome cover
Radome base
XN10A-RSB-0070/0073-064 and
XN12A-RSB-0070/0073-059
XN10A-RSB-0070/0073-064A and
XN12A-RSB-0070/0073-059A
1-7