Telephone Operation - VTech SIP Contemporary Series User Manual

Telephone operation

SIP Corded Trimstyle 1-line
CTM-S2315
Receive a call
When there is an incoming call, the telephone
rings and the MESSAGE WAITING LED flashes.
To answer a call:
Press SPEAKER or lift the corded handset
from the telephone base to answer. The
MESSAGE WAITING LED illuminates when
the phone line is in use. The SPEAKER
illuminates when in speakerphone mode.
Place a call
Press SPEAKER or lift the corded handset
from the telephone base. Listen for a dial
tone and then dial the desired number. The
MESSAGE WAITING LED illuminates when
the phone line is in use. The SPEAKER
illuminates when in speakerphone mode.
End a call
Place the corded handset on the telephone
base or press
SPEAKER
speakerphone mode.
Speakerphone
1. D press
uring a call,
a call between the corded handset
earpiece and the speakerphone.
The SPEAKER key illuminates when in
use.
press
2. In idle mode,
the speakerphone mode and
key illuminates when in speakerphone
.
mode
key
key
if you are in
to switch
SPEAKER
to activate
SPEAKER
SPEAKER
Volume
Listening volume can be adjusted from the
corded handset and ringer volume can be
adjusted from the telephone base.
To adjust the listening volume:
During a call, press VOL+/ VOL- to adjust
the listening volume. The next call returns to
the default listening volume.
To adjust the ringer volume:
press VOL+/ VOL- to adjust
In idle mode,
the ringer volume.
Message waiting indicator
When a voice message is received, the
MESSAGE WAITING LED on the telephone
base flashes.
Play messages
Press MESSAGES
messages.
Mute
Mute the microphone
1. During a call, press MUTE
MUTE
• The
function is turned on. You can hear the party
on the other end but they cannot hear you.
MUTE
2. Press
conversation.
• The light on the
Hold
To place a call on hold:
During a call, press the switch hook then
release it to hold a call or place a new call.
EN - 12
in idle mode to play
.
key illuminates when the mute
again to resume the
MUTE
key turns off.