Table 5
describes the Driver Configuration components.
Table 5
Driver Configuration menu components
Menu Option
NVRAM Parameters
1. Edit Adapter Settings
2. Edit Advanced Settings
3. Edit Database
4. Edit Boot Settings
Information
5. Show Database
6. Show Translation
7. Show NVRAM Buffer
8. Info
9. Help
Description
Displays the Edit Adapter Settings menu.
Displays the Edit Advanced Settings menu.
Displays the Edit Database screen.
Displays the Edit Boot Settings menu.
Displays the contents of the WWN database in table form.
Displays the SCSI target id translation table. This table is a list of SCSI
tid and fibre channel loop id mapping pairs. Each entry in the table
consists of the following for each device:
•
SCSI id (tid)
•
Fibre channel loop id (lid)
•
World wide port name (WWPN)
•
World wide node name (WWNN)
All numbers are in hexadecimal. Tid values from 0x00 to 0x0A are
persistent, and tid values greater than 0x0A are assigned
sequentially as devices are discovered. Tid values greater than 0x80
are fabric-attached while those below 0x7F are
arbitrated-loop-attached.
Displays the contents of the local NVRAM buffer in hexadecimal. This
is the local buffer containing changes made prior to using the Write
selection to commit them to the HBA's NVRAM.
Displays the following HBA information:
•
EFI device path
•
Port WWPN
•
Serial number
•
SSVID and SSDID from NVRAM
Use the device path to determine which HBA configuration is displayed.
Displays a brief description of the menu selections.
A6826A PCI-X host bus adapter for Itanium Linux systems installation guide
Get other manuals https://www.bkmanuals.com
29