Post Conditions And Results; Post Led States - HP StorageWorks A6826A Installation Manual
Pci-x host bus adapter for itanium linux systems
Hide thumbs
Also See for StorageWorks A6826A:
- Release notes (10 pages) ,
- Installation manual (52 pages)
Table of Contents
Advertisement
POST conditions and results
Figure 1
on page 12 shows the position of the POST LED indicators.
If the LEDs indicate a failure during POST:
1.
Make sure the HBA is seated firmly in the PCI slot.
2.
Verify that the fiber cable connection to the HBA is secure.
3.
Check the POST LED states listed in to determine the HBA status. .
Table 4
POST LED states
Amber LED (L1)
Off
On
Slow blink (1 Hz)
Fast blink (4 Hz)
Flashing (irregular)
Off
On
1 Fast Blink
2 Fast Blinks
3 Fast Blinks
4.
If a problem occurs, follow the instructions in the next sections to troubleshoot.
Green LED (L2)
State
Off
Wake-up failure (dead board)
Off
POST failure (dead board)
Off
Wake-up failure (dead board)
Off
Failure in POST (dead board)
Off
POST processing in progress
On
Failure while functioning
On
Failure while functioning
On
1Gb-link rate; Normal; link up
On
2Gb-link rate; Normal; link up
On
4Gb-link rate; Normal; link up
A6826A PCI-X host bus adapter for Itanium Linux systems installation guide
Get other manuals https://www.bkmanuals.com
25
Advertisement
Table of Contents
