B Building A Driver From Sources - HP StorageWorks A6826A Installation Manual

Pci-x host bus adapter for itanium linux systems

Hide thumbs Also See for StorageWorks A6826A:

Table of Contents

Building a driver from sources

This appendix describes how to build a Linux driver from sources.

In some cases, it may be necessary to build the driver in your configuration locally. These

instructions for building the driver are required only if the driver was not installed from the driver kit

or from the HP driver RPM.

This appendix includes:

• Building a uniprocessor version of the

• Building a multiprocessor version of the

Note the following:

•

The following instructions are provided for reference only.

•

The process for building the driver on your system may differ slightly from these examples. The

examples are based on Linux systems with 2.4 kernels.

•

To build a single-processor version of the qla2300 driver, see

of the

driver" on page 32.

•

To build a symmetric multiprocessor (SMP) version of the qla2300 driver, see

multiprocessor version of the

NOTE:

You need the gcc compiler installed on your system. If it is not installed, do so now.

driver, page 32

driver, page 33

driver" on page 33.

A6826A PCI-X host bus adapter for Itanium Linux systems installation guide

Get other manuals https://www.bkmanuals.com

"Building a uniprocessor version

"Building a

Table of Contents