Configuring The Hbas; Selecting A Device To Update; Firmware Flash Results - HP Integrity BL890c - i2 Server Software Manual

Fibre channel host bus adapters software guide for windows

Hide thumbs Also See for Integrity BL890c - i2 Server:

Table of Contents

Select the devices you want to update.

Figure 15 Selecting a device to update

Press Tab to the Begin Flash option to flash the HBA.

At the prompt, press Tab to the Continue option, and then press Enter to begin the flash.

When the flash is completed, the utility automatically reboots the server and starts the EBSU. The

EBSU indicates that the flash was successful.

Figure 16 Firmware Flash Results

Press Enter twice to return to the main menu.

Configuring the HBAs

This section describes how to configure the HBAs.

Boot from SAN

Table of Contents

Integrity rx2800 - i2 Bl860c