Table of Contents
Advertisement
Level 1
WLAN
(For wireless network
models)
Wi-Fi Direct
(For wireless network
models)
Level 2
Level 3
TCP/IP
DNS Server
APIPA
IPv6
Setup Wizard
-
WLAN
-
Assistant
WPS
-
WPS w/ PIN
-
Code
WLAN Status
Status
Signal
SSID
Comm. Mode
MAC Address
-
Set to
-
Default
WLAN Enable
-
Push Button
-
PIN Code
-
Manual
-
Group Owner
-
Device
Device Name
Information
SSID
Level 4
Descriptions
Primary
Specify the IP address of the
primary DNS server.
Secondary
Specify the IP address of the
secondary DNS server.
-
Set the machine to allocate the
IP address from the link-local
address range automatically.
-
Turn the IPv6 protocol on or off.
To use the IPv6 protocol, go to
the Brother Solutions Center at
support.brother.com
information.
-
Configure the wireless network
settings using the setup wizard.
-
Configure your wireless
network settings using the
Brother CD-ROM.
-
Configure your wireless
network settings using the one-
button push method.
-
Configure your wireless
network settings using WPS
with a PIN.
-
View the current wireless
network status.
-
View the current wireless
network signal strength.
-
View the current SSID.
-
View the current
Communication Mode.
-
View the machine's MAC
address.
-
Restore the wireless network
settings to the factory settings.
-
Turns the wireless interface on
or off.
-
Configure your Wi-Fi Direct
network settings using the one-
button push method.
-
Configure your Wi-Fi Direct
network settings using WPS
with a PIN code.
-
Configure your Wi-Fi Direct
network settings manually.
-
Set your machine as the Group
Owner.
-
View your machine's device
name.
-
View the Group Owner's SSID.
When the machine is not
connected, the LCD displays
Not Connected.
for more
636
Advertisement
Table of Contents
