Table of Contents
Advertisement
•
To avoid print quality problems, DO NOT touch the surface of the drum unit, only the edge.
•
You can turn the drum unit gear more easily by pulling down the black levers. When you have finished
turning the gear, push the levers back to the original position.
12. Wipe the surface of the drum gently with a dry cotton swab until the mark on the surface comes off.
NOTE
DO NOT clean the surface of the photosensitive drum with a sharp object or any liquids.
13. Put the toner cartridge firmly into the drum unit until you hear it lock into place.
Make sure you put the toner cartridge in correctly or it may separate from the drum unit.
14. Install the toner cartridge and drum unit assembly back into the machine.
592
Advertisement
Table of Contents
