Advertisement
B. SHOCK ASSEMBLY
SHOCK BAG
B1. Assemble front and rear shocks
Shock Assemblies
Silicone Shock Oil
Front Shock Springs
Rear Shock Springs
Upper Spring Retainers (4)
Lower Spring Retainers (4)
Preload Spacers (2)
ACCESSORY
Aluminum Accessory
Aluminum Shock Caps
3767A - Blue
3767G - Green
3767X - Red
Option Part
Titanium Nitride
Shock Shafts
1664T Long
2656T XX-long
1
2
Fill with
shock oil
Unscrew
cap
Shock Exploded View
Shock Cap
Rubber
Preload
Diaphragm
Spacer*
Upper Spring
Retainer
Lower Spring
Retainer
Shock
Spring
*8mm preload spacer on front shocks only
3
Slowly move piston
to remove excess
air, then let sit a few
minutes until all the
bubbles are out.
3mm
(1/8")
Exercise shock to make sure it compresses fully. If it does not, it is overfilled.
Front Shocks
Assembled
8mm
Preload
Spacer
4
5
1.5mm
(1/16")
Add oil to reach the
Note: Shaft should
proper level. Ensure
be fully compressed
the piston is covered in
when cap is installed.
oil to prevent pulling
air into the shock.
Rear Shocks
Assembled
STAMPEDE 4X4 • 7
x4
Advertisement
