Mitsubishi Electric Unisen 154 Series Owner's Manual page 87

Appendix E: Troubleshooting, continued
Reset Name
VUDU
Reset VUDU
Account Pass-
word
VUDU
Reset Parental
Controls Pass
Code
General TV Operation
Symptom
1. The TV remote control does not work.
2. When I try to use the remote control, the POWER
key blinks five times.
3.
TV does not respond to the remote control or
to control-panel buttons and TV will not power
on or off.
4. When a device is selected from the Input
Selection menu, the screen is blue or black (no
signal source).
5. You have forgotten your Lock menu pass code.
6.
Rating restrictions are not working.
7.
On-screen displays appear each time you
change a function.
8. A warning message appeared on screen
stating, "TV will shut down in a few seconds.
Please check if the air flow is blocked."
9. I have turned on CEC for my HDMI devices but
control is erratic and I wish to disable it.
Downloaded From TV-Manual.com Manuals
When to Use How to Use
You have forgotten Using a computer, go to
your account pass- www.VUDU.com.
word.
You have forgotten Call VUDU Customer Care at
your pass code. 1-888-554-VUDU (8838).
Get other manuals https://www.bkmanuals.com
Appendices
Remarks
• Check that the batteries are fresh and installed correctly.
• Check that the control mode on the remote is set to TV.
• Be no more than 20 feet from the TV when using the remote control.
• Program the remote control to operate the TV or other device.
• Reset the remote control. See
page 84.
Replace the batteries.
• Unplug the AC power cord for 10 seconds.
• Press and hold the POWER button on the control panel to
perform system reset.
• Make sure the selected device is turned on.
• Begin play of the device.
See "Bypassing the Parental Lock", Appendix B.
Open the Lock > Parental menu and:
• Verify that the ratings locks are active.
• Check the Lock Time/Unlock Time to check if rating restric-
tions are disabled.
• Rating restrictions apply only to content on the ANT input.
Normal TV operation.
• Internal TV temperature has exceeded proper levels. Cool
the room.
• The TV has overheated. Clear blocked air vents and ensure
at least four inches of clearance on all sides of the TV.
• First turn off the TV's HDMI control for the specific device.
Open the Inputs > HDMI Control menu, select the device,
select Off.
• Disable CEC on the device itself. See the device's instruc-
tions.
• If the problem persists, do the following:
1. Disconnect the device from the TV.
2. Inputs > Name menu and select Delete for
Open the
the device.
3. Reconnect the device to the TV and Auto Input Sensing
will recognize the device with CEC disabled.
For assistance call 1(800) 332-2119
Resulting Action
Reset your account password
from the VUDU website (requires
access to e-mail).
VUDU Customer Care will reset
your pass code.
"Resetting the Remote Control,"
87