Mitsubishi Electric Unisen 154 Series Owner's Manual page 64

64
5. NetCommand IR Control (265 Series)
Operating NetCommand-Controlled Devices, continued
Special Operation Methods
Key Name in
Special Operation Description and Setup
Learning Screen
Power On Manual Power On/Off
Use for devices that have only one POWER key.
Power On Automatic Power On/Off
This feature is only for devices that have separate
Power Off
POWER ON and POWER OFF keys on their original
remote controls. If your device does not have a
separate POWER OFF key, do not use the Power
Off learning position; use only the Manual Power
ON/OFF method described above.
In the NetCommand Learn screen:
a. "Learn" the Power On command in the
Power On learning position.
b. "Learn" the Power Off command in the
Power Off learning position.
Menu Displaying a Menu for the Current Device
"Learn" the MENU key on the original remote in the
Menu learning position.
Guide Displaying the On-Screen Program Guide
(cable box or satellite receiver)
1. "Learn" the
the Guide learning position.
2. Learn the
original remote in the Page Up and Page
Down learning positions.
Enter ENTER-Key Functions (cable boxes, satellite receivers, etc.)
Some devices have two keys that have "enter" functions. One key is for menus and is often labelled
SELECT or OK. A second key is for use with number keys for direct channel selection. NetCommand
uses the same ENTER key for both operations.
When ENTER has a menu or guide function or
when the original remote control uses the same
key for menus and channel selection:
Learn the ENTER, SELECT, or OK key in the
NetCommand Enter learning position.
Downloaded From TV-Manual.com Manuals
For assistance call 1(800) 332-2119
GUIDE key on the original remote in
PAGE UP and PAGE DOWN keys of the
Get other manuals https://www.bkmanuals.com
How to Use
1. Press INPUT.
2.
Highlight the icon for the device to be
powered on or off.
3. With the Input Selection menu still dis-
played, press POWER to send the power
signal; you may need to press POWER twice.
Note: If you press POWER without the Input Se-
lection menu displayed, the TV will turn
off.
4. Press ENTER to switch the TV to the device.
To Power On the Device
•
1. Press INPUT.
2. Highlight the icon for the device to be
powered on or off.
3. Press ENTER to switch the TV to the
device and NetCommand will send the
Power On command to the device.
• To Power Off the Device
When you turn the TV off, the TV sends all
learned Power Off commands to all devices.
Press TOOLS and number 3 to send the menu
signal to the device.
1.
While watching the device, press
display the guide.
2. PAGE to send the Page Up/Dn com-
Press
mands for the guide.
1. Press MENU or GUIDE to display the device's
menu or guide.
2. Press ENTER within the menu and
NetCommand will send the Enter signal for
menus.
GUIDE to