Mitsubishi Electric Unisen 154 Series Owner's Manual page 50

50
4. TV Menus
Sound, continued
Sound Mode Stereo
Surround
Music
Night
Level Sound On, Off
Listen To Stereo
(applies only
to analog
Mono
channels from
the ANT input)
SAP
(Second Audio
Program)
Sound Global
Analog Audio
Out
Subwoofer
Center Channel
Sound Auto SP
Sound SoundPro
Downloaded From TV-Manual.com Manuals
For assistance call 1(800) 332-2119
No special audio effects from the TV speakers
Modifies audio from the TV speakers.
• For monaural (non-stereo) programs, creates a simulated stereo effect.
• For stereo programs, creates a simulated surround sound effect.
• The TV's speaker array plays surround sound if available.
Optimizes the TV's speaker array for music listening.
Focuses the TV's speaker array to a single point to limit sound heard by others
outside the room. Press ENTER to adjust the focal point (Night Angle).
Reduces differences in sound volume between programming segments, such as the
difference between regular broadcast programs and commercial segments.
The TV plays stereo broadcasts in stereo and mono broadcasts in mono. The word
Stereo is displayed when you tune to a channel broadcasting in stereo.
Reduces background noise. Use when receiving a weak stereo audio signal. All
audio is played as mono.
Selects an additional monaural sound track not audible during normal TV viewing.
The SAP signal might be related to the program (such as a sound track in a foreign
language), or it might be unrelated (such as a weather report). If an SAP signal is
broadcast, the letters SAP are displayed when you tune to the channel.
Settings in this menu apply to all inputs.
These settings affect audio from the AVR/SURROUND OUTPUT jacks.
Fixed
Use with an analog A/V receiver. Control volume from the A/V receiver. The
volume of the audio output signal is fixed and is unaffected by the TV's volume
control.
Variable Use with headphones. Adjust headphone volume using the TV's volume controls.
When set to Variable, the audio output signal is adjustable from the TV's volume
controls.
Rear Sends left and right rear audio to external speakers. Use when supplementing the
TV's speaker array with external rear speakers. See "External Rear Speakers," page 41.
Select On to turn on audio to a connected subwoofer. Set to Off if no subwoofer is connected.
On allows the TV's speakers to complement your external sound system as a center channel. Set
to Off if not in use.
265 Series. Performs auto calibration of the Sound Projector speaker array. See "Auto
Setup," page 40.
Lets you set up the Sound Projector speaker array manually. See page 38.
Get other manuals https://www.bkmanuals.com