Mitsubishi Electric Unisen 154 Series Owner's Manual page 65

Operating NetCommand-Controlled Devices, continued
Key Name in
Special Operation Description and Setup
Learning Screen
Enter (digits) When ENTER is for channel changes, i.e., the origi-
nal remote control has a separate ENTER key for
this function):
Learn the ENTER key for channel selection in
the NetCommand Enter (digits) learning posi-
tion. Use this learning position only if the original
remote control has separate keys for Enter in
menus and Enter for channel selection.
Cancel CANCEL as the Cancel or Exit Function
"Learn" the Cancel or Exit function in the
NetCommand Cancel learning position
—
The symbol "—" can serve as the separator
(separator) between a digital channel's main and sub-channel
digits, e.g., digital channel 12-1 (main channel is
12, sub-channel is 1).
"Learn" the channel separator function in the
NetCommand – (separator) learning position.
Downloaded From TV-Manual.com Manuals
5. NetCommand IR Control (265 Series)
Get other manuals https://www.bkmanuals.com
How to Use
Press digit key(s) and then press ENTER.
NetCommand will send the Enter signal for
channel selection.
1. Press MENU or GUIDE to display the menu or
guide.
2. Press CANCEL and NetCommand will send
the Cancel or Exit signal.
Press digit key(s) and press CANCEL.
NetCommand will send the channel-separator
signal.
For assistance call 1(800) 332-2119
65