Table of Contents
Advertisement
Setting the [Preset Temp.] or [Alternative
Temp.] Values
You can change both the color temperature
settings in the Preset mode in the menu.
1 Open the [Preset Temp.] or [Alternative
Temp.] menu.
Select [Main Menu] B [Camera Process] B
0
[White Balance] B [Preset Temp.] and
[Alternative Temp.], and press the Set button
(R).
The Color Temperature setting screen
0
appears.
Color Temperature Selection Screen
.
2 Select the color temperature.
When selecting from a setting value (Color
0
Temperature Selection screen), use the
cross-shaped button (JK) to select the color
temperature.
[Setting Values: 7500K, 6500K, 5600K,
5200K, 4800K, 4200K, 3200K, 3000K,
2800K]
To select detailed values (Color
0
Temperature Detailed Selection screen)
Press the cross-shaped button (I) to
0
display the Color Temperature Detailed
Selection screen.
Use the cross-shaped button (JK) to
0
select a color temperature.
[Setting Values: 2300K to 15000K (in
100K increments)]
Memo :
Use the cross-shaped button (I) to switch
0
between the Color Temperature Selection
screen and the Color Temperature Detailed
Selection screen.
If [White Balance] is assigned to the user button,
0
pressing the assigned user button will display
the Color Temperature Selection screen.
(A P33 [Assignment of Functions to User
Buttons] )
56
Adjusting the White Balance
Memory A Mode (A), Memory B Mode
(B)
Set to the white balance saved in Memory A or
0
Memory B.
When the [WHT.BAL B/A/PRST] switch is set to
0
"A" or "B", press the [AWB/9] button to execute
Auto White Balance. The white balance will be
automatically adjusted and the adjusted value
will be saved in Memory A or Memory B.
* You can also use the user button assigned with
[AWB] instead of the [AWB/9] button.
(A P92 [User Switch Set Item] )
1 Prepare the camera recorder.
A Set the [POWER ON/OFF] switch to "ON".
B Press and hold the [FULL AUTO] button to set to
"OFF".
C Press the [IRIS A/M] button to set to the Auto mode.
2 Set the [ND FILTER] switch according to the
lighting.
(A P53 [Setting the ND Filter] )
Color Temperature
Detailed Selection
3 Set the [WHT.BAL B/A/PRST] switch to "A" or
Screen
"B".
4 Locate a place with similar lighting conditions
as the object to be shot, place a white object
near the center of the screen and zoom in to
fill the screen with white.
5 Press the [AWB/9] button.
0
0
0
The white detection frame appears when Auto
White Balance is activated. Fill the frame with
white completely.
While Auto White Balance is starting up,
"A< y >" or "B< y >" appears on the screen.
(y mark appears blinking)
After the correct white balance is obtained, an
estimated value of the current color
temperature is displayed.
Advertisement
Table of Contents
