JVC GY-HM190AG Instructions Manual page 111

4GB File Spanning(SDXC)
A recording file is automatically split when the size
exceeds 4 GB, but if an SDXC card is used, you
can record clips larger than 4 GB by setting this
option to "Off". (Up to a maximum of 64 GB or 4
hours)
On:
0
Splits a file when it exceeds 4 GB or 30 minutes.
Off:
0
Splits a file when it exceeds 64 GB or 4 hours.
[Setting Values: ROn, Off]
Memo :
This option is only valid if the SD card used for
0
recording is of the SDXC format.
During simultaneous recording, such as Dual
0
Rec and backup recording, this option is valid
only when the SD cards in both slots are of the
SDXC format.
This option is valid only when [Record Format]
0
B [WFormat]/[YFormat] is set to "QuickTime".
(A P108 [ W Format ] )
LPCM (QuickTime)
For setting the audio recording format of
QuickTime.
[Setting Values: Dual Mono, RStereo]
Time Stamp
For setting whether to display shooting date/time
information in the recorded video.
[Setting Values: On, ROff]
Memo :
The date/time display style can be changed in
0
[LCD/VF] B [Display Settings] B [Date Style]/
[Time Style].
(A P102 [ Date Style ] )
(A P102 [ Time Style ] )
When [System] is set to "4K", this item is fixed at
0
"Off".
Clip Set
9 Clip Name Prefix
For setting the first four characters of the name of
the clip file to be recorded to the SD card.
Enter any of the 36 characters including alphabets
(upper case) and numbers (0 to 9) using the
software keyboard.
(A P88 [Text Input with Software Keyboard] )
[Setting Values: xxxG] (The default value of xxx is
the last three digits of the serial number.)
Memo :
When [Main Menu] B [System] B [Record Set]
0
B [Record Format] B [WFormat] is set to
"AVCHD", this setting is not reflected in the file
name of the clip.
However, it is recorded as the display name of
the clip in the thumbnail display.
9 Reset Clip Number
For assigning a new number (Clip Number) by
resetting it (0001).
Select [Reset] and press the Set button (R) to reset
the number.
When [WFormat] is set to "AVCHD", the clip
number is reset to "00000".
When other clips exist on the SD card, the smallest
available number is used after reset.
Example:
0
If the [Clip Name Prefix] is "ABCD", and
"ABCD0001" already exists on the SD card,
"ABCD0002" will be assigned.
111
System Menu