JVC GY-HM190AG Instructions Manual page 110

4k memory card camera recorder
Table of Contents

Advertisement

Rec Mode
For selecting the record mode for recording to
0
the SD card.
(A P72 [Special Recording] )
The selectable options vary according to the
0
[Record Format] menu settings.
Format
Frame Rate
AVCHD
60p, 60i, 50p, 50i Normal, Pre
QuickTime
60p, 60i, 50p, 50i,
30p, 25p, 24p
Memo :
When [Slot Mode] is set to "Backup", this item is
0
fixed at "Normal".
9 Pre Rec Time
For setting the pre-recording time when [Rec
Mode] is set to "Pre Rec".
[Setting Values: R5sec, 10sec, 15sec]
Memo :
When [Main Menu] B [System] B [Record Set]
0
B [Record Format] B [System] is set to "4K", this
item is fixed at "5sec".
9 Rec Frames
For setting the number of frames to record when
[Rec Mode] is set to "Frame Rec" or "Interval Rec".
[Setting Values: R1frame, 3frames, 6frames]
9 Rec Interval
For setting the recording time interval when [Rec
Mode] is set to "Interval Rec".
[Setting Values: R1sec, 2sec, 5sec, 10sec, 30sec,
1min, 2min, 5min, 10min, 30min, 1hour]
110
System Menu
Slot Mode
For setting the operation of the card slot.
0
0
Setting values
0
Rec, Interval
Rec, Frame Rec
Normal, Pre
Rec, Clip
Continuous,
Interval Rec,
Frame Rec
Memo :
0
0
0
0
9 Backup Rec
For starting/stopping backup recording with [REC]/
[STBY].
This item is selectable only when [Slot Mode] is set
to "Backup".
Memo :
0
Series:
Mode that activates the two slots sequentially.
Dual:
Mode that activates the two slots at the same
time.
(A P68 [Dual Rec] )
Backup:
Mode that enables recording to slot B without
using the [REC] button. This item is selectable
only when [Rec Mode] is set to "Normal".
Start or stop the recording using the [Backup
Rec] menu or press the [USER1] to [USER7],
[LCD KEY▲], [LCD KEY▶], [LCD KEY▼], [LCD
KEY◀] button that is assigned with "Backup
Trig".
(A P70 [Backup Rec] )
This item cannot be selected when [Main
Menu] B [System] B [Record Set] B [System] is
set to "HD+Web".
When this is set to "Series", and recordable
media are inserted in both slots, pressing the
[REC] button starts recording only to the card in
the selected slot (active slot).
When "Series" is selected, and [Record
Format] B [WFormat] is set to "AVCHD", the
clips are recorded over the slots seamlessly
without interruption in the video.
When this is set to "Dual", and recordable media
are inserted in both slots, pressing the [REC]
button starts simultaneous recording to the
cards in both slots.
When recording is stopped due to no remaining
space on the media, etc., this item is fixed at
"STOP" and cannot be selected.

Advertisement

Table of Contents
loading

Table of Contents