Dynamic Range Compression; Multi-Channel Tv Sound (Analog); Multi-Channel Tv Sound (Digital); Digital Audio Output - Panasonic Diga DMR-EZ28 Operating Instructions Manual

(Input Level )
Adjusts the black level of the input signal.
After selecting "Black Level Control"
(~
50, step 3)
0., •
to select "Input Level", then
~
o.,•
to select "Lighter" or "Darker",
then~
(Output Level (Composite/S Video) )
Adjusts the black level of the output signal from the
VIDEO OUT and S VIDEO OUT terminal.
After selecting "Black Level Control"
(~
50, step 3)
o ., •
to select "Output Level
(Composite/S Video)", then
~
o ., •
to select "Lighter" or
"Darker", then
OK
Dynamic Range Compression
I!I'1!I!J
(Dolby Digital only)
Change the dynamic range
(~77)
for easier listening
in low volume.
Perform step 1 of "Accessing the Setup Menus"
(~
46).
(e ., •
to select "Audio", then
~
)
e .,•
to select "Dynamic Range
Compression", then
~
o .,•
to select "On" or "Off", then
~
Multi-channel TV Sound (Analog)
iii m!D EMM 1m
ID]IIIm'J
Select whether to record the main or secondary audio
program (SAP) when recording to these discs. (You cannot
select the audio type on the unit when recording audio
from an external device. Select it on the external device.)
Perform step 1 of "Accessing the Setup Menus"
(~
46).
(e .,•
to select "Audio", then
~
)
e ..,•
to select "Multi-channel TV
Sound (Analog)", then
~
o ., •
to select "Main" or "Secondary
Audio Program (SAP)", then
~
Multi-channel TV Sound (Digital)
Select the preferred digital broadcast language.
Perform step 1 of "Accessing the Setup Menus" (-+ 46).
(e ., •
to select "Audio", then
~
)
e .,•
to select "Multi-channel TV
Sound (Digital)", then
~
0., •
to select "English", "French" or
"Spanish", then
~
Digital Audio Output
Change the settings when you have connected
equipment through the unit's DIGITAL AUDIO OUT
terminal
(~
60).
Perform step 1 of "Accessing the Setup Menus"
(-+
46).
(e .,•
to select "Audio", then
~
)
e ., •
to select "Digital Audio
Output", then
~
(PCM Down Conversion )
Select how to output audio with a sampling frequency
of 96 kHz or 88.2 kHz. Signals are converted to 48 kHz
or 44.1 kHz despite the settings if the signals have a
sampling frequency of over 96 kHz or 88.2 kHz, or the
disc has copy protection.
After selecting "Digital Audio Output"
(~
above, step 3)
o ., •
to select "PCM Down
Conversion", then
~
o ., •
to select "On" or "Off", then
~
[On] Signals are converted to 48 kHz or 44.1 kHz.
(Choose when the connected equipment
cannot process signals with sampling
frequency of 96 kHz or 88.2 kHz.)
[Off] Signals are output as 96 kHz or 88.2 kHz.
(Choose when the connected equipment can
process signals with sampling frequency of 96
kHz or 88.2 kHz.)
RQT9046