Table of Contents
Advertisement
2
STEP
Channel reception settings and TV aspect settings
Numbered
buttons
,,,
OK
OPTION
1
Turn on the television and select the
appropriate AV input to suit the
connections to this unit.
2
Press [Í] to turn the unit on.
When connecting to a television that has the VIERA Link or Q
Link functions (
Download from TV
Download in progress. Please wait.
RETURN: to cancel
RETURN
You can download the tuning positions from the television for
the channels in this unit's channel coverage.
This unit's Auto Clock Setting function synchronizes the time
when the TV channel that is broadcasting time and date
information is tuned.
≥If the Country setting menu appears on the television
Press [3, 4, 2, 1] to select the country and press
[OK].
"Auto Setup" starts. This takes about 8 minutes.
Press [3, 4] to select "On", "Off" or "On Timer" and
press [OK] when the "Power Save in Standby" setting
menu appears.
Power Save in Standby
Power Save
From
0
:00
Saves standby power consumption
by disabling Quick Start function and
CHANGE
AV2 loop-through in standby. Unit's Display
is set to "Automatic".
OK
RETURN
On:
It will go into the Power Save in Standby mode
when the unit is in standby mode.
Off:
It is possible to start quickly from the standby mode.
(Quick Start mode)
On Timer:
Press [3, 4, 2, 1] to set the start and stop time
and then press [OK].
≥"Power Save in Standby" is set to activate during
the setting time period.
VQT2J12
10
CH
GUIDE
RETURN
40), downloading from the television starts.
On
To
6
:00
The features of the Power Save in Standby function when
the unit is in standby mode are as below.
Power Save in Standby Activated (On/
Power consumption
Startup time
Watching the picture
(e.g. Pay TV) from the
device connected to AV2
"Unit's Display" is set to "Automatic" in the Setup menu.
§1
(
67)
It is possible to startup and start recording within several
§2
seconds.
– Depending on the type of TV or the connected
terminal, it may take time to display the screen.
When "RF OUT ( Aerial Signal )" is set to "Off" in the
§3
Setup menu (
69)
≥If the TV aspect setting screen appears on the television
TV Aspect
16:9 WIDE TV
16:9
4:3 TV
Pan & Scan
Letterbox
SELECT
OK
RETURN
≥16:9:
When connected to a 16:9 widescreen television
≥Pan & Scan:
When connected to a 4:3 aspect television,
side picture is trimmed for 16:9 picture
(
85).
Letterbox:When connected to a 4:3
aspect television. 16:9 picture is shown in
the letterbox style (
85)
Press [3, 4] to select the TV aspect and press [OK].
When television type and aspect is set, the GUIDE Plus+
setting screen appears.
Auto Setup
Do you want to setup
the GUIDE Plus+ system ?
Yes
No
SELECT
OK
RETURN
(The above message also appears in countries where
GUIDE Plus+ system is not available. However set up is not
possible.)
≥If you want to set up the GUIDE Plus+ system
Press [2, 1] to select "Yes" and press [OK].
Proceed to "
11, GUIDE Plus+ system settings, step 2"
≥If you do not want to set up the GUIDE Plus+ system or if
you live in a country where GUIDE Plus+ system is not
available (
11, GUIDE Plus+ system)
Press [2, 1] to select "No" and press [OK].
Television picture appears. Set up is complete.
To stop partway
Press [RETURN
].
∫ If the clock setting menu appears
Set the clock manually (
68).
∫ To confirm that stations have been tuned
correctly (
64)
∫ To restart setup (
65)
Deactivated
(Off)
On Timer)
§1
Approx. 0.3 W
Approx. 9 W
§3
Not Quick
Quick
§2
Cannot do
Can do
Hide quick links:
Advertisement
Table of Contents
