Bradford White Magnum D75T125E3N Installation & Operation Manual page 30

Step 3b: Press "Temperature Down" button to change temperature format to °F.
Step 4: Press "SET" button to confirm ˚F or ˚C format. °F/°C will stop flashing. Setpoint display will appear in the format
selected (˚F or ˚C) in 10 seconds.
Step 5: Pressing "SELECT" button will return display to setpoint in format selected (˚F or ˚C) immediately.
idle
Operational
Status
SELECT
Step 3b
idle
Status Operational
SELECT
Step 4
idle
Operational
Status

SELECT
Press select
Step 5
°F °F/°C

SET
°F °F/°C

SET
°F
SET
30
Changes to "°F"
°F/°C Flashes
Symbol "°F/°C" Stops Flashing
Press Set
Setpoint shown in °F