Table of Contents
Advertisement
To Increase Setpoint Temperature
Step 1: Depress and hold "Temperature Up" button until desired setpoint temperature appears in the display.
Step 2: "Setpoint" indicator begins flashing in the display after pressing "Temperature Up" button.
Step 3: Press "SET" button for new setting to take effect immediately. "Setpoint" will stop flashing. If the "SET" button is not
pressed, the new temperature setting will take effect in approximately 10 seconds.
°F
idle
Operational
Status
SELECT
SET
Step 1
setpoint
°F
idle
Operational
Status
SELECT
SET
Step 2
setpoint
°F
idle
Operational
Status
SELECT
SET
Press SET Button for setting to
Step 3
to take effect immediately
27
"Setpoint"
flashes
"Setpoint" flashes
for 10 seconds
Hide quick links:
Advertisement
Table of Contents
