For best results, the belt should be pressed against the base of the clip.
Hardware Interface
Receiver Front and Back Panels
① Display
② Arrow Buttons
③ Enter Button
④ Sync Button
⑤ Power Switch
⑥ Audio LED
⑦ Menu Button
⑧ RF LED
Shows menu options, receiver and transmitter settings.
Adjust gain setting or change menu parameters.
Press to save menu or parameter changes.
Press to activate IR sync.
Powers receiver on or off.
•
Green = normal
•
Yellow = signal approaching limiter threshold
•
Red = limiter engaged to prevent clipping
•
Press to access or select menu screens
•
Press to cancel pending changes
•
Press and hold to return to the home screen
Illuminates when RF link with transmitter is active.
Shure Incorporated
10/60