Wearing The Bodypack Transmitter; Hardware Interface; Receiver Front And Back Panels - Shure QLX-D Series Manual

QLX-D Wireless System
2. Increase or decrease the gain if necessary by pressing the arrow buttons on the receiver front panel.

Wearing the Bodypack Transmitter

Clip the transmitter to a belt or slide a guitar strap through the transmitter clip
as shown.
For best results, the belt should be pressed against the base of the clip.

Hardware Interface

Receiver Front and Back Panels

① Display
Shows menu options, receiver and transmitter settings.
② Arrow Buttons
Adjust gain setting or change menu parameters.
③ Enter Button
Press to save menu or parameter changes.
④ Sync Button
Press to activate IR sync.
⑤ Power Switch
Powers receiver on or off.
⑥ Audio LED
• Green = normal
• Yellow = signal approaching limiter threshold
• Red = limiter engaged to prevent clipping
6/34
TV
MHz
hr mn
dB
group channel rf audio gain
6 7 8 9
1 2 3 4
10
5
Shure Incorporated
2017/10/04