Table of Contents
Advertisement
⑨ IR Window
⑩ Sync LED
⑪ Power Cord Strain
Relief
⑫ Power Supply Jack
⑬ Ethernet Port
⑭ Receiver Reset
⑮ Antenna Connectors
⑯ Mic/Line Switch
⑰ XLR Audio Output
⑱ 1/4" Instrument/
Auxiliary Output
Align with the transmitter IR window during an IR sync to automatically program
transmitters.
•
Blinking: IR sync mode is enabled
•
On: Receiver and transmitter aligned for IR sync
Secures power cord.
Connection point for DC power supply.
For network connection.
•
Amber LED (network speed):
off = 10 Mbps, on = 100 Mbps
•
Green LED (network status):
off = no network link, on = network link active
flashing = rate corresponds to traffic volume
Press to restore receiver default settings.
BNC connector for receiver antennas
Sets output level to microphone or line.
Balanced (1: ground, 2: audio +, 3: audio - )
Impedance Balanced (Tip: audio, Ring: no audio, Sleeve: ground)
Shure Incorporated
11/60
Advertisement
Table of Contents
