Dual And Quad Receiver Models; Hardware Interface - Shure ULX-D Dual Manual

ULX-D Dual and Quad Z16-20 ULX-D
channel audio over Ethernet. All receivers offer High-Density mode for applications where high channel counts are needed, greatly increasing the amount of
simultaneous channels possible over one frequency band.
Advanced Lithium-ion rechargeability provides extended transmitter battery life over alkaline batteries, battery life metering in hours and minutes accurate to
within 15 minutes, and detailed tracking of battery health status.
Generations ahead of any other available system in its class, ULX-D brings a new level of performance to professional sound reinforcement.

Dual and Quad Receiver Models

The ULXD4 receiver is available in dual channel and quad channel models. Both models share the same feature set and functionality, but differ in the number
of channels available and the number of audio outputs.
The descriptions and procedures in this guide are applicable to either the dual or the quad receiver.

Hardware Interface

Receiver
Front Panel
1
ULXD4Q
Digital Wireless Receiver
IR
① Infrared (IR) Sync Window
Sends IR signal to the transmitter for sync.
② Network Icon
Illuminates when the receiver is connected with other Shure devices on the network. IP Address must be valid to enable networked control.
③ Encryption Icon
Illuminates when AES-256 encryption is activated.
4/45
Digital Wireless Microphone System
ULXD4D Dual Receiver
Supports 2 channels of wireless audio.
ULXD4Q Quad Receiver
Supports 4 channels of wireless audio.
6
control
ENTER
EXIT
SCAN
push
2 3 4 5 7
8 10 12
RX1 RX2
audio gain audio gain
RF RF
A B A B
OL OL
SEL
SEL OL OL
sync sync
9 11 13
RX3 RX4
audio gain audio gain
RF RF
A B A B
OL OL
SEL
OL SEL OL
sync sync
Shure Incorporated
power
14
2017/06/09