Table of Contents
Advertisement
① Custom Groups
② TV Channel Spacing
③ Low Battery Alert
④ Boundary/Gooseneck
Transmitter Presets
⑤ Firmware Update
⑥ IP Settings
⑦ Network Reset
⑧ Factory Reset
For application and configuration details, see the related guide topic for each advanced feature.
Tips for Editing Menu Parameters
•
To increase, decrease or change a parameter, use the arrow buttons
•
A menu setting will blink when editing is enabled
•
To save a menu change, press enter
•
To exit a menu without saving a change, press menu
•
To access the advanced menu, press menu while holding the enter button from the home screen
•
To return to the home screen from any menu without saving changes, press and hold the menu button.
Transmitters
① Power LED
•
Green = unit is powered on
•
Red = low battery
② On/Off Switch
Use to add channels and frequencies to Custom Groups
Selects the regional bandwidth for TV channel display
Enable or disable the low battery alert on the receiver screen
Sends ULXD6/ULXD8 presets configured in WWB to transmitters via the IR Sync
window
Displays what kind transmitter firmware the receiver has available. See Firmware
Updates for more details.
•
HH BP = handheld or bodypack firmware
•
BN GN = boundary or gooseneck firmware
Use to select and edit IP settings and subnet masks
Returns network settings and IP address to default setting
Restores factory settings
Shure Incorporated
14/60
Advertisement
Table of Contents
