Table of Contents
Advertisement
Language
Touch to open a pop-up window with language selections that will change
the language of all text in your machine. Scroll up and down by touching the
navigator arrows. Touch to select language and confirm by touching OK.
The language setting is saved even if the machine is turned off.
Buttonhole Balance
If the Sensor One-Step Buttonhole Foot is not connected or if you select
stitch 1:28, the columns in the buttonhole stitch will be sewn in different
directions. On some fabrics this may cause the columns to appear with
different density.
Touch to open a window to adjust the buttonhole balance. The changes only
affect the selected stitch. If another stitch is selected or the same stitch is
selected again, the value is reset to the default value.
Software Version
The software version currently loaded for the sewing machine is displayed.
Calibrate TouchScreen
If you touch a function or menu on the TouchScreen but it does not
respond, or if the function next to it is activated instead, the screen has to be
calibrated.
You only need to calibrate the TouchScreen if there is a precision problem
when touching the screen.
Touch Calibrate TouchScreen to open a view for calibration. Follow the
instructions on the screen to calibrate.
Note: When calibrating the screen, be sure to touch the calibration areas only, as instructed.
If other areas are touched, the screen can be miscalibrated.
26 – OPERATING YOUR SEWING MACHINE
Advertisement
Table of Contents
