Functions On The Touchscreen - Husqvarna Viking Tribute 145C User Manual

FUNCTIONS ON THE TOUCHSCREEN

1. Exclusive SEWING ADVISOR
The Exclusive SEWING ADVISOR
stitch, stitch length, stitch width, sewing speed and thread
tension for the selected fabric and sewing technique
(see page 27).
Touch the Fabric/Techniques tabs and make your selection
by touching the fabric/technique you want to use. Touch the
arrow in the upper left corner of the TouchScreen to exit the
Exclusive SEWING ADVISOR
The stitch is shown on the TouchScreen with presser foot,
presser foot pressure and needle recommendations.
2. Thread Tension
The best thread tension for the selected stitch and fabric is set
automatically. The thread tension can be adjusted for specialty
thread, technique or fabric. Touch + to increase the thread
tension and – to decrease it.
3. Mirror End to End
Touch to mirror the selected stitch end to end. If touched in
Sew Out Mode for stitch programs, the whole stitch program
is mirrored. The change is visible on the TouchScreen.
4. Stitch Length/Density
When you select a stitch, your machine automatically sets
the best stitch length. The stitch length is visible on the
TouchScreen. You can change the stitch length by touching
the – or + icons.
If you have selected a buttonhole the TouchScreen will show
the density setting instead of the stitch length setting. You will
now be able to change the density setting by touching – or +.
If you press Alt (6) when a satin stitch is selected, the
TouchScreen will show the density setting. Touch – or + to
change the density.
5. Stitch Width/Needle position
The stitch width is set in the same manner as the stitch length.
The preset width is visible on the TouchScreen. The width can
be adjusted between 0 and 7 mm. Some stitches have a limited
stitch width.
If a straight stitch is selected, – and + are used to move the
needle to the left or right in 29 positions.
6. Alt (Alternate View)
Touch the Alt icon to show the stitch density instead of the
stitch length for some stitches.
™
feature sets the best
™
feature.
™
1
2
3 4
7. Mirror Side to Side
Touch to mirror the selected stitch side to side. In straight
stitch, with a left needle position, touching this icon will move
the needle from the left to the right symmetrically across
the center position. If touched in Sew Out Mode for stitch
programs, the whole stitch program is mirrored. The change is
visible on the TouchScreen.
8. Stitch/Font Menu
Touch the Stitch/Font Menu icon, to open the stitch selection
window. There are three tabs, Stitch Menu, My Stitches Menu
and Font Menu.
See page 21 for more information on how to select a stitch/
font.
9. Navigator Arrows
Use the up/down arrows to scroll up and down in a list of
selections.
10. Program Mode
Touch to open the mode for programming. Touch again to
exit the program mode.
11. Save to My Stitches
Touch to open the menu where you can save your own
personal stitches or stitch programs. Touch again to exit the
My Stitches menu.
12. SET Menu
Touch to open the menu for machine settings. Make changes
and selections by touching the boxes next to each function.
Scroll up and down with the Navigator arrows (9). Touch the
SET-Menu icon again to exit the SET Menu.
6
5 7
OPERATING YOUR SEWING MACHINE – 19
8
9
10
11
12