Table of Contents
Advertisement
Sew Out the Stitch Program
When you are done with your program touch the My Stitches
icon to save it (see below) or, if still in Programming Mode,
touch the PROG icon or step on the foot control to switch to
Sewing Mode.
Once you are in Sewing Mode and step on the foot control the
machine will sew out your stitch program. The program will
be sewn continuously if no STOP is programmed. Press the
STOP button to sew your stitch program only once.
Step through your sequence by touching the arrow icons (A).
MY STITCHES MENU
My Stitches is your own personal menu where you can save
and recall your programs or favorite stitches with personal
settings.
Tribute
145C has 8 memories. Each memory has a
TM
maximum space of 20 stitches.
Save a Stitch or a Program
Touch the My Stitches icon from Programming or Sewing
Mode. This will open the My Stitches Menu. Touch to select
an empty memory. If the selected memory is not empty, a
pop-up message will appear asking if you wish to overwrite
the previously saved stitch/program with the new one. Touch
"
" to confirm your selection. Touch "" to exit and select
another position. Touch the My Stitches icon again to return
to Sewing Mode or Programming Mode.
Note: If you want to clear a memory, overwrite by saving an empty
program.
Load a Saved Stitch or Program
To load a saved stitch or program from My Stitches, touch the
Stitch/Font Menu icon and touch the My Stitches tab. Scroll
up and down to view the memories using the navigator arrows.
Touch to select the saved stitch or program. The stitch/
program will appear in Sewing Mode ready to be sewn.
24 – OPERATING YOUR SEWING MACHINE
Sewing Mode
My Stitches menu
Load a saved stitch or program
from My Stitches menu
A
Advertisement
Table of Contents
