Table of Contents
Advertisement
PROGRAMMING
The Programming function on your machine makes it possible to create stitches with your own personal settings and to
combine stitches and letters into stitch programs. You can add up to 20 stitches and letters in the same program. Save your
own stitches and programs in My Stitches and recall them any time you like.
All stitches in your sewing machine are programmable except for buttonholes, darning, Automatic Tapering Stitches, button
sewing and bartacks.
Create a Stitch Program
1. Touch the PROG icon to open the mode for
Programming.
2. The stitch menu which was previously selected will be kept
when entering the Programming mode. To change the
stitch menu, see page 21.
3. Select the stitch you wish to use. The stitch will appear on
the TouchScreen (A).
4. Select the next stitch and it will appear to the right of the
last entered stitch.
Note: Two numbers are displayed on the TouchScreen below the stitch
program between the selection arrows (B). The first number is the position
of the selected stitch in the program. The second number, put in brackets,
is the total number of stitches in the program.
The number above the stitch program (C) on the right side of the
TouchScreen is the number of the selected stitch.
Add Letters
5. Select a font and the machine will show the upper case
alphabet in Programming Mode.
6. Touch to select a letter and to add the letter to the
program.
7. To switch to a lower case alphabet or numbers touch the
Navigator Arrows (G).
About Programming Letters
Both upper and lower case letters will be stitched with a
7 mm stitch width. If there are letters going below the
baseline included in the program (e.g. j, p, y) the height of the
uppercase letters will be reduced.
All text to be sewn out on the same project should, if possible,
be in the same program to ensure the letters are sewn out in
the same height.
Add Stitches or Letters at other Positions
If you wish to add a stitch or letter at another position in the
program, move the cursor by touching the arrow icons (D).
The stitch or letter will be inserted to the right of the cursor.
22 – OPERATING YOUR SEWING MACHINE
A
B
Programming Mode
A. Stitch program
B. Position of selected stitch in the program/
total number of stitches in program
C. Selected stitch and stitch menu.
D. Selection arrows used to step through the
program
E. Delete the selected stitch
F. Touch Alt to toggle between different settings.
"Husqvarna" and "VIKING" have been programmed separately.
"Husqvarna" and "VIKING" are in the same program.
C
D
E
F
G
Advertisement
Table of Contents
