Dell UltraSharp U2424H User Manual page 93

When the monitor goes into Standby mode, the following message appears:
Activate the computer and wake up the monitor to gain access to the OSD.
The OSD functions only in the normal operation mode. If you press any button other
than the Power Button during the Standby mode, the following message will
appear depending on the selected input:
NOTE: The message may be slightly different according to the
connected input signal.
Activate the computer and the monitor to gain access to the OSD.
If either USB Type-C (applicable for U2424HE only), DisplayPort, or HDMI input is
selected and the corresponding cable is not connected, a floating dialog box as
shown below appears.
NOTE: The message may be slightly different according to the
connected input signal.
Operating the monitor
│
93