Back View - Dell UltraSharp U2424H User Manual

Back view

No.
1 VESA mounting holes (100 mm
x 100 mm - behind the attached
VESA Cover)
2 Regulatory label
3 Stand release button
4 Barcode, serial number, and
Service Tag label
5 Power button
6 Joystick
7 Cable-management slot
│
14 About your monitor
Description
Back view with monitor stand
Use
Wall mount monitor using VESA-
compatible wall mount kit (100 mm x
100 mm).
Lists the regulatory approvals.
Releases stand from the monitor.
See this label if you need to contact
Dell for technical support. The
Service Tag is a unique alphanumeric
identifier that enables Dell service
technicians to identify the hardware
components in your monitor and
access warranty information.
To turn the monitor on or off.
Use to control the OSD menu. For
more Information, see
monitor.
Use to organize cables by routing
them through the slot.
Operating the