Dell UltraSharp U2424H User Manual page 18

6 SuperSpeed USB 10
Gbps (USB 3.2 Gen2)
Type-C upstream port
(video and data)
7 DisplayPort (out)
8 SuperSpeed USB 10
Gbps (USB 3.2 Gen2)
Type-C upstream port
(data only)
│
18 About your monitor
Connect the USB Type-C cable (shipped
with your monitor) from the monitor to the
computer or notebook. This port supports
USB Power Delivery, Data, and DisplayPort
video signal.
The SuperSpeed USB 10 Gbps (USB 3.2
Gen2) Type-C port offers the fastest transfer
rate and the alternate mode with DP 1.4
supports a maximum resolution of
1920 x 1080 at 120 Hz, PD 20 V/4.5 A, 
15 V/3 A, 9 V/3 A, 5 V/3 A.
NOTE: USB Type-C is not supported on
versions of Windows prior to Windows 10 and
Windows 11.
DisplayPort output for MST (multi-stream
transport) capable monitor. To enable MST,
see Connecting the monitor for DP Multi-
Stream Transport (MST)
NOTE: Remove the rubber plug when using
DisplayPort out connector.
Connect the USB A-C cable (shipped with
your monitor) from the monitor to the
computer. This port supports USB data
transfer at 10 Gbps (USB 3.2 Gen2). Once
this cable is connected, you can use the USB
connectors on the monitor.
NOTE: USB Type-C is not supported on
versions of Windows prior to Windows 10 and
Windows 11.
NOTE: Remove the rubber plug when using
USB Type-C upstream port (data only)
connector.
function.