Dell UltraSharp U2424H User Manual page 74

USB-C
(applicable for
U2424HE only)
DP
HDMI
Auto Select
Auto Select for
USB-C
(applicable for
U2424HE only)
Rename Inputs
Reset Input
Source
│
74 Operating the monitor
90W
Select the USB-C
the USB Type-C connector. Press the joystick to
confirm the selection.
Select the DP input when you are using the
DisplayPort (DP) connector. Press the joystick to
confirm the selection.
Select the HDMI input when you are using the HDMI
connector. Press the joystick to confirm the
selection.
Allows you to scan for available input sources. The
default is on.
Allows you to set Auto Select for USB-C to:
• Prompt for Multiple Inputs: Always displays
the "Switch to USB-C Video Input" message
for you to choose whether to switch or not.
• Yes: Always switches to USB-C video input
(without asking) when the USB Type-C cable is
connected.
• No: Never automatically switches to USB-C video
input when the USB Type-C cable is connected.
NOTE: Auto Select for USB-C is available only
when Auto Select is on.
Allows you to select the input name for the selected
input source. The options are PC, PC 1, PC 2,
Laptop, Laptop 1, and Laptop 2.
NOTE: Input names in warning messages and Display
Info will not be changed.
Press the joystick to reset all settings under the
Input Source menu to the factory preset values.
90W input when you are using