Advertisement
Tray 5-Loading Labels, Letterhead, Envelopes
Loading Labels/Letterhead:
1. Open tray 5 by rotating it outward.
2. Load labels in the tray face down with the top edge towards the front of the tray.
Load letterhead face up with the top towards the front of the device.
Loading Envelopes:
1. Open tray 5 by rotating it outward.
2. Load envelopes in the tray with the flaps open, face up and flaps on the trailing edge, toward the left.
3. Center the stack, then slide the guides until they lightly touch the edges of the stack.
3. Then slide the guides until they lightly touch the edges of the stack.
4. Verify the size and type as LABELS or LETTERHEAD loaded.
Change the selection for any incorrect setting.
5. On the copier touch screen, touch Confirm.
4. Verify the size and type of the envelope. Change the selection for any incorrect
setting. Select the size before the type.
5. On the printer touch screen, touch Confirm.
Page 20
Advertisement
