Initialize Tab; Backup Setting Data; Restore Setting; Format Ata Memory Card - Sony IPELA SNC-RZ50N User Manual

Position
Select the position of the superimposed item from
among Top-left, Top-right, Bottom-left and Bottom-
right
Notes
• The superimposed camera ID and/or date & time area
is regarded as an inactive area of the object detection
function.
• A pale image may be viewed under the background of
the superimposed area.
• The size of the superimposed number is reduced if the
image size is set to 384 × 288 or 320 × 240 (QVGA).
• The superimposed number is not readable if the image
size is set to 160 × 120 (QQVGA).
• When you have changed the Date & Time setting,
click Refresh of the Web browser to reflect the change
on the opening main viewer.
OK/Cancel
See "Buttons common to every menu" on page 31.

Initialize Tab

Reboot
Reboots the camera.
Click Reboot, and the message "This Camera will be
rebooted. Are you sure?" appears. Click OK to reboot
the camera. It takes about two minutes to start again.

Factory default

Resets the camera to the factory settings.
Click Factory default, and the message "Setup data will
be initialized. Are you sure?" appears. When you click
OK, the network indicator on the camera starts to blink.
After adjustments of the default settings have finished,
the camera reboots automatically. Do not turn off the
camera until the camera reboots.
36
Configuring the System — System Menu
Tip
The camera can also be reset to the factory settings by
turning on the power of this unit while pressing the reset
switch on the camera. For details, see the supplied
Installation Manual.

Backup setting data

Saves the setting data of the camera in a file.
Click Save, and follow the instructions on the Web
browser to specify the folder and save the setting data of
the camera. The file name preset at the factory is "snc-
rz50.cfg."

Restore setting

Loads the stored setting data of the camera.
Click Browse and select the file in which the setting data
is stored. Then, click OK, and the camera is adjusted
according to the loaded data and restarted.
Restore preset position and privacy masking
settings
When you select it, the stored setting data of the camera,
the preset position data and the privacy masking data are
loaded.
Notes
• With Restore setting, some items in the Network
menu (page 44) cannot be restored.
• When Restore preset position and privacy masking
settings is selected, it may take a long time to load the
setting data.
• The following items cannot be stored or restored with
Backup setting data or Restore setting.
– audio files uploaded using SNC audio upload tool
– a panorama image recorded in the camera using
SNC panorama creator
– a homepage created using Custom Homepage
Installer
– a client certificate and CA certificate to be used in
the 802.1X authentication function
– a certificate to be used in the SSL function (the
model on sale in China does not support the SSL
function.)

Format ATA memory card

Click Format to format the ATA memory card (not
supplied) inserted into the PC card slot of the camera.
The files and folders stored in the ATA memory card are
deleted while formatting.

Format CF memory card

Click Format to format the CF memory card (not
supplied) inserted into the CF card slot of the camera.