Setting The Camera Image And Audio - Camera Menu; Common Tab - Sony IPELA SNC-RZ50N User Manual

Setting the Camera
Image and Audio
— Camera Menu
When you click
the Camera menu appears.
Use this menu to set the functions of the camera.
The Camera menu consists of five tabs: Common,
Picture, Day/Night, Video codec and Streaming.

Common Tab

Image mode
Selects the mode of the image output from the camera.
Field: Select this option when shooting a moving image.
Frame: Select this option when shooting a still image.
With this setting, the vertical resolution increases but
the edge of a moving object may be jagged.
Auto: The Frame or Field mode process is
automatically performed depending on movement in
the image. Frame is performed for an area without
movement, and Field is performed for an area with
movement.
Color
Select Color or Monochrome for the image.
E. flip
The image can be displayed upside down. Select Off
when you fix the camera to the ceiling. Select On when
you install the camera on the rack or the desk.
38
Setting the Camera Image and Audio — Camera Menu
in the Administrator menu,
Zoom mode
Selects the zoom mode.
Full: An image can be zoomed up to 26× optical zoom
and 12× digital zoom, 312× zoom in total.
Optical: An image can be zoomed up to 26× optical
zoom.
Focus mode
Selects the focus mode.
Auto: The focus is automatically adjusted.
Manual: The focus can be adjusted by using the NEAR,
FAR and ONE PUSH FOCUS buttons of the
control panel displayed from the main viewer.
Stabilizer
Select the stabilizer to compensate for oscillation. Select
On to activate the stabilizer when the camera is affected
by oscillation.
Notes
• The stabilizer is effective for the images on a
computer. They are not effective for the video output.
• The view angle of the camera is reduced by
approximately 10 % when Stabilizer is set to On.
• The frame rate lowers half when Stabilizer is set to
On.
• The stabilizer may not be effective depending on the
degree of oscillation.
• Set Stabilizer to Off when using the privacy mask
(page 105).
• If a flat object such as a solid wall or floor occupies the
greater part of a shooting scene or if a large object
occupying the greater part of the scene passes by or
continues moving, the whole image may tremble. In
this case, set Stabilizer to Off.
• When the brightness of the scene changes suddenly or
when you change the brightness setting, the whole
image may tremble momentarily.
Microphone
Select whether you are going to send the audio from the
m microphone input connector. Select On to send the
audio from this network camera.
Note
When you change the Microphone setting, click
Refresh on the Web browser to reflect the change when
opening the main viewer.
Mic volume
Set the volume level of the audio input from the m
microphone input connector. It is adjustable from –10 to
+10.