5
Select Add Program....
6
In the Add Program dialog, select IP Setup
Program and click OK.
Then the IP Setup Program is added to the
Programs and Services list.
7
Click OK.
When the above procedure is completed, the
cameras connected in the local network are
displayed in the IP Setup Program.
12
Assigning the IP Address to the Camera
When using Windows Vista
Installing software
A warning message regarding the active contents may
appear when you install software such as IP Setup
Program from CD-ROM. In this case, operate as
follows:
Example: In case of IP Setup Program
If pop-up "AutoPlay" appears when a CD-ROM is
inserted into the CD-ROM drive, click Install or run
program.
Note
If you click Open folder to view files, Web browser will
not open automatically. In this case, double-click the
"index.htm" file in the CD-ROM.
If message "Internet Explorer" appears, click Yes.