When Using Windows Xp Service Pack 2 - Sony IPELA SNC-RZ50N User Manual

If "Setting OK" is displayed, the IP address is
correctly assigned.
12
To access the camera directly, double-click the
camera name in the list.
Tip
The factory setting of the camera network is as
follows.
IP address: 192.168.0.100
Subnet mask: 255.0.0.0
Wireless LAN setting
Type: Adhoc
SSID: snc-rz50
Channel: 11 ch
WEP: Nothing
IP address: 10.0.0.100
Subnet mask: 255.0.0.0
The welcome page of the network camera is
displayed on the Web browser.
Notes
• If the IP address is not set correctly, the welcome page
does not appear after step 12. In that case, try to set the
IP address again.
• When you set the SSL function (SSL tab, page 49) to
On, "Security Alert" dialog or Alert page may appear
10
Assigning the IP Address to the Camera
according to the status of the certificate. In this case,
allow the browser to continue reading. (The model on
sale in China does not support the SSL function.)
When using Windows XP Service
Pack 2
Installing software
A warning message regarding the active contents may
appear when you install software such as IP Setup
Program from CD-ROM. In this case, operate as
follows:
Example: In case of IP Setup Program
If message "Internet Explorer" appears, click Yes.
If message "File Download – Security Warning"
appears, click Run.
Note
If you select Save in the "File Download – Security
Warning" dialog, you will not be able to perform
installation correctly. Delete the downloaded file, and
click the Setup icon again.