To Remove The Ca Certificate Which Has Been Installed - Sony IPELA SNC-RZ50N User Manual

To remove the CA certificate which
has been installed
1
In Internet Explorer, click in the order
corresponding to Tools, Internet options, Content
tab and Certificates.
Certificates dialog appears.
2
Select the certificate you want to remove.
The CA certificate is usually stored in Trusted
Root Certification Authorities.
3
Click Remove.
Do you want to delete the certificates? dialog
appears to confirm.
4
Click Yes.
The certificate will be removed.
There may be a case that a certificate cannot be removed
by the steps above due to the type of certificate. Check
the installation condition and remove it following the
steps below.
Note
You need to log in as Administrator to perform these
steps.
1
Open Run... of the Windows menu, then enter mmc
and click OK.
2
Select File in the Console 1 window and Add/
Remove Snap-in... (when Windows XP
Professional is used)
Add/Remove Snap-in... dialog appears.
3
Click Add to display Add Stand-alone Snap-in
dialog.
You need to follow this step if using Windows XP
Professional.
4
Select Certificates from the list, then click Add.
Certificate Snap-in is displayed.
5
Select Computer account as the certificate
administrated in this Snap-in, then click Next.
6
Select Local Computer as the computer
administrated in this Snap-in, then click Finish.
7
Close Add Standalone Snap-in (for Windows XP
Professional only) and Add/Remove Snap-in...
dialogs.
The items for administrating Certificates appears
in the Console Route window.
Confirm the relevant certificate, then remove it.
Configuring the Network — Network Menu
53