When Using Windows Xp Service Pack 2 - Sony IPELA SNC-DF70N User Manual

If "Setting OK" is displayed, the IP address is
correctly assigned.
12
To access the camera directly, double-click the
camera name in the list.
Tip
The factory setting of the camera network is as
follows.
IP address: 192.168.0.100
Subnet mask: 255.0.0.0
The welcome page of the network camera is displayed in
the Web browser.
Note
If the IP address is not set correctly, the welcome page
does not appear after step 12. In this case, try to set the
IP address again.
When using Windows XP Service
Pack 2
Installing software
A warning message regarding the active contents may
appear when you install software such as IP Setup
Program from CD-ROM. In this case, operate as
follows:
Example: In case of IP Setup Program
If message "Internet Explorer" appears, click Yes.
If message "File Download – Security Warning"
appears, click Run.
Note
If you select Save in the "File Download – Security
Warning" dialog, you will not be able to perform
installation correctly. Delete the downloaded file, and
click the Setup icon again.
If message "Internet Explorer – Security Warning"
appears, click Run.
The software installation starts.
Installing ActiveX Control
During installation of ActiveX Control, the information
bar or "Security Warning" may appear. In this case,
operate as follows:
Assigning the IP Address to the Camera
9