Sd-Sdi Menu; Down Converter Menu - Sony BRC-Z700 Operating Instructions Manual

SD-SDI Menu

The SD-SDI menu is displayed only when the BRBK-
HSD1 HD/SD-SDI Output Card is inserted in the card
slot of the camera and the HD/SD select switch on the
Board is set to SD.
< S D - S D I >
> I M G S I Z E
IMG SIZE
Select the aspect ratio of the output signal.
16:9 [LETTER]: The image is displayed in 16:9
letterbox.
4:3 [CROP]: The image is displayed in 4:3 edge crop.
4:3 [SQUEEZE]: The image is displayed in 4:3
squeeze.
1 6 : 9 [ L E T T E R ]
DOWN CONVERTER
Menu
The DOWN CONVERTER menu is displayed only
when the HFBK-SD1 SD Interface Board is inserted in
the card slot of the BRU-H700 HD Optical Multiplex
Unit.
< D O W N C O N V E R T E R >
> D - S U B O U T 1
D - S U B O U T 2
I M G S I Z E
S E T U P
D-SUB OUT1
Select the component signal output from the MONITOR
connector (D-sub 9-pin) on the HFBK-SD1 SD
Interface Board.
YPbPr: Outputs analog component signals.
RGB: Outputs RGB signals.
ADD SYNC
Appears when RGB is selected with D-SUB OUT1 and
specifies whether to add a sync signal.
RGB: Outputs each R, G and B signal with a sync signal
added.
G: Outputs the G signal with a sync signal added.
OFF: Outputs each signal with no sync signal added.
D-SUB OUT2
Select the output signal from the MONITOR connector
on the HFBK-SD1 SD Interface Board.
VBS: Outputs analog composite signals.
Y/C: Outputs S-video signals.
IMG-SIZE (image size)
Select the aspect ratio of the output signal.
16:9[LETTER]: The image is displayed in 16:9
letterbox.
4:3[CROP]: The image is displayed in 4:3 edge crop.
4:3[SQUEEZE]: The image is displayed in 4:3
squeeze.
SETUP
Select whether 7.5IRE setup is added to output signals.
ON: Outputs signals with 7.5IRE setup added.
OFF: Outputs signals with no 7.5IRE setup added.
SD-SDI Menu / DOWN CONVERTER Menu
Y P P
b r
V B S
1 6 : 9 [ L E T T E R ]
O F F
39