Sony BRC-Z700 Operating Instructions Manual page 9

BRBK-HSD1 HD/SD-SDI Output Card
Insert the card into the camera to allow output of an HD-
SDI signal conforming to SMPTE292M serial digital
interface standards, or output of an SD-SDI signal
conforming to SMPTE259M serial digital interface
standards. An audio signal is not output from the card.
BRU-H700 HD Optical Multiplex Unit
The HD Optical Multiplex Unit allows a connection up
to of 1,000 m (3,281 feet) using the CCFC-M100HG 2-
core optical fiber cable.
Supplied accessories: AC power cord (1), RS-232C
connecting cable (3 m) (1), RS-422 connector plug (1)
CCFC-M100HG Optical Fiber Cable
This is a 2-core multi-mode optical fiber cable of 100 m
(328 feet) long.
Supplied accessories: extension plug
Video Switcher (commercially available)
It switches the video signal input of multiple cameras.
VCL-HG0862K Wide Conversion Lens
The lens is a 0.8-magnification wide conversion lens.
Optional products for the BRU-H700
The Interface Boards described below can be used with
the BRU-H700 HD Optical Multiplex Unit. They cannot
be inserted into the BRC-Z700 camera.
HFBK-SD1 SD Interface Board
The board allows output of an analog video signal such
as the composite video, S video, component video and
RGB signals, or a down-converted SD-SDI signal.
An audio signal of the SD-SDI signal is not output from
the board.
9
System Components