Hfbk-Sd1 Sd Interface Board (Not Supplied) (Available With The Bru-H700 Only); Hfbk-Hd1 Hd Interface Board (Not Supplied) (Available With The Bru-H700 Only); Hfbk-Xg1 Xga Interface Board (Not Supplied) (Available With The Bru-H700 Only); Hfbk-Ts1 Hdv Interface Board (Not Supplied) (Available With The Bru-H700 Only) - Sony BRC-Z700 Operating Instructions Manual

HFBK-SD1 SD Interface Board (not
supplied) (available with the BRU-
H700 only)
1
MONITOR
HFBK-SD1
A MONITOR connector (D-sub 9-pin)
Supplies various analog signals such as composite
video, S video, component video and RGB signals.
The output signal can be selected in the DOWN
CONVERTER menu of the camera.
B DIP switches (inside the cap)
When this Interface Board is inserted into the BRU-
H700 HD Optical Multiplex Unit, the DIP switches
cannot be used.
C VIDEO connector (BNC type)
Supplies analog composite signals. The aspect ratio
can be selected in the DOWN CONVERTER menu
of the camera.
D SD-SDI connector (BNC type)
Supplies down-converted SD-SDI signals that
conform to SMPTE259M (for 59.94i signal format)
or ITU-R BT.656 (for 50i signal format) serial
digital interface standards. The aspect ratio can be
selected with the DOWN CONVERTER menu of
the camera.
HFBK-HD1 HD Interface Board (not
supplied) (available with the BRU-
H700 only)
1
MONITOR
HFBK-HD1
A MONITOR connector (D-sub 15-pin)
Supplies analog video signals (component or
RGB). The output signal can be selected in the HD-
SDI menu of the camera.
B DIP switches (inside the cap)
26
Location and Function of Parts
2 3 4
VIDEO SD-SDI
2 3
HD-SDI HD-SDI
When this Interface Board is inserted into the BRU-
H700 HD Optical Multiplex Unit, the DIP switches
cannot be used.
C HD-SDI connector (BNC type)
Supplies HD-SDI signals that conform to the
SMPTE292M serial digital interface standards. The
two connectors output the same signal.
HFBK-XG1 XGA Interface Board
(not supplied) (available with the
BRU-H700 only)
1 2
MONITOR
HFBK-XG1
A MONITOR connector (D-sub 15-pin)
Supplies video signals after conversion to VGA,
XGA or WXGA. The standards of output signal
and aspect ratio can be specified in the PC-
OUTPUT menu.
B DIP switches (inside the cap)
When this Interface Board is inserted into the BRU-
H700 HD Optical Multiplex Unit, the DIP switches
cannot be used.
HFBK-TS1 HDV Interface Board
(not supplied) (available with the
BRU-H700 only)
1
R L
AUDIO
HFBK-TS1
A AUDIO L/R jacks (phono type)
Input audio signals (stereo).
The input audio signals are converted into signals
that comply with HDV standards.
B DIP switches (inside the cap)
When this Interface Board is inserted into the BRU-
H700 HD Optical Multiplex Unit, the DIP switches
cannot be used.
2 3
i.LINK ( HDV ) OUT