Table of Contents
Advertisement
Table 1. Features available on the front of the system
Item
Ports, panels, and slots
`1
Left control panel
2
Drive slots
3
Right control panel
4
Information tag
Figure 3. Front view of 8 x 3.5-inch drive system
Table 2. Features available on the front of the system
Item
Ports, panels, and
slots
1
Left control panel
Icon
N/A
N/A
N/A
N/A
Icon
N/A
Description
Contains the system health and system ID, status LED, and
the iDRAC Quick Sync 2 (wireless) indicator.
NOTE:
The iDRAC Quick Sync 2 indicator is available only
on certain configurations.
● Status LED: Enables you to identify any failed hardware
components. There are up to five status LEDs and an
overall system health LED (Chassis health and system ID)
bar. For more information, see the
section.
● Quick Sync 2 (wireless): Indicates a Quick Sync enabled
system. The Quick Sync feature is optional. This feature
enables management of the system by using mobile
devices. This feature aggregates hardware or firmware
inventory and various system level diagnostic and error
information that can be used in troubleshooting the
system. For more information, see the Integrated Dell
Remote Access Controller User's Guide at
poweredgemanuals.
Enable you to install drives that are supported on your system.
For more information, see the Dell EMC PowerEdge R540
Technical Specifications on the product documentation page.
Contains the power button, USB ports, iDRAC Direct (Micro-
AB USB), VGA port.
The Information Tag is a slide-out label panel that contains
system information such as Service Tag, NIC, MAC address,
and so on. If you have opted for the secure default access
to iDRAC, the Information tag also contains the iDRAC secure
default password.
Description
Contains the system health and system ID, status LED, and the
iDRAC Quick Sync 2 (wireless) indicator.
NOTE:
The iDRAC Quick Sync 2 indicator is available only
on certain configurations.
Dell EMC PowerEdge R540 overview
Status LED indicators
www.dell.com/
9
Advertisement
Table of Contents
