Dell EMC PowerEdge R450 Xeon 4309Y Installation And Service Manual page 17

Table 10. Back panel features of R540 (continued)
Item
Figure 10. Back panel features of 12 x 3.5-inch + 2 x 3.5-inch (rear) drive system
Table 11. Back panel features of R540
Item
1
2
3
4
5
Features
Features
Serial port
Drive (2)
Full height riser slot
Power supply unit (PSU) (2)
LOM riser port (2)
Icon
Icon
N/A
N/A
N/A
Dell EMC PowerEdge R540 overview
Description
● If the system stops
responding during
POST, press and hold
the system ID button
(for more than five
seconds) to enter the
BIOS progress mode.
Description
Use the serial port to connect
a serial device to the system.
For more information about
the supported serial port, For
more information, see the
Dell EMC PowerEdge R540
Technical Specifications on
the product documentation
page.
Two optional rear drives
supported for 12 x 3.5 inch
system.
Use the card slots to connect
full-height PCIe expansion
cards on full height riser.
For information about
supported PSUs, For more
information, see the Dell EMC
PowerEdge R540 Technical
Specifications on the product
documentation page.
Use the Ethernet or SFP+
ports to connect Local Area
Networks (LANs) to the
system. For more information
about the supported Ethernet
or SFP+ ports, For more
information, see the Dell EMC
17