Dell EMC PowerEdge R450 Xeon 4309Y Installation And Service Manual page 19

Table 11. Back panel features of R540 (continued)
Item
Figure 11. Back panel features of 12 x 3.5-inch drive system with butterfly riser
Table 12. Back panel features of R540
Item Features
1 Serial port
2
Butterfly riser slot
3 PCIe slot (3)
4 Power supply unit (PSU)
5 LOM riser ports
6 Ethernet ports (2)
7 USB 3.0 port
8 iDRAC9 dedicated network
port
9 VGA port
Features
Icon
N/A
N/A
N/A
Icon
Description
Use the serial port to connect a serial device to the
system. For more information about the supported serial port,
For more information, see the Dell EMC PowerEdge R540
Technical Specifications on the product documentation page.
Use the card slots to connect full-height PCIe expansion cards
on butterfly riser.
Use the card slots to connect up to three half-height PCIe
expansion cards on the system board.
For information about supported PSUs, For more information,
see the Dell EMC PowerEdge R540 Technical Specifications
on the product documentation page.
Use the Ethernet or SFP+ ports to connect Local Area
Networks (LANs) to the system. For more information about
the supported Ethernet or SFP+ ports, For more information,
see the Dell EMC PowerEdge R540 Technical Specifications
on the product documentation page.
Use the Ethernet ports to connect Local Area Networks
(LANs) to the system. For more information about the
supported Ethernet ports, For more information, see the
Dell EMC PowerEdge R540 Technical Specifications on the
product documentation page.
Use the USB 3.0 port to connect USB devices to the system.
These ports are 4-pin, USB 3.0-compliant.
Use the iDRAC9 dedicated network port to securely access
the embedded iDRAC on a separate management network, see
the Integrated Dell Remote Access Controller User's Guide at
www.dell.com/poweredgemanuals.
Use the VGA port to connect a display to the system. For
more information about the supported VGA port, For more
Dell EMC PowerEdge R540 overview
Description
(for more than five
seconds) to enter the
BIOS progress mode.
19